70mai Jump Starter Wholesale
Description

70mai Jump Starter70mai Jump Starter

How to use the 70mai Jump Starter? Using the device as a 12V jump starter

1. Connect the jump starter to the device. Ensure that the indicator on the battery clips are off.
2. Connect the battery clips correctly to the positive and negative ends of the car battery. The red clip should be connected to the positive (+) end, while  the black clip should be connected to the negative (-) end. Then, follow the instructions below:
  • When the green light is turned on, the connection is correct and the battery can be jump started.
  • When the red light is turned on and a buzzer sound can be heard, the clips are connected to the wrong ends. Connect the clips correctly and make sure the green light is turned on before jump starting the battery.
  • When the green light is flickering and a buzzer sound can be heard, the voltage is too low. Press the boost button and wait till the green light stops flickering. Jump start the battery within 30 seconds.
  • When both the green and red lights are not turned on and no buzzer sound can be heard, the battery may be completed damaged. Ensure that the clips are connected to the correct ends. Press the boost button and wait till thegreen light is turned on. Jump start the battery within 30 seconds.

3. After the car is jump started, remove the battery clips.

70mai Jump Starter70mai Jump Starter

Independent lighting switch,you can change it into lighting ,Strobe lighting and SOS signal light by one switch.

In full charged status,you can use highlight lighting continuously for 48 hours.Help you handle emergency situation freely when equipped your car with it.

70mai Jump Starter

DO Anti-reverse interface design,can be recognized automatically when battery clip is being  reversed,avoiding wrong operation.

70mai Jump Starter70mai Jump Starter70mai Jump StarterAn overall easy-to-use jump starter that’s ideal for any newbie. Connect your portable jump starter, start your car, disconnect the jump starter, and then leave. Don’t wait for someone to save you, take care of it yourself and leave. 70mai Jump Starter

Basically the same size as a portable power bank for smartphones

Cellphone will always have 4% battery power when you need them most. A good reason to keep a power pack jump starter in your car is that most will have a USB port on them that you can use to charge your phone. You can also use it to charge a tablet and anything else that gets it’s charge through a USB chord.70mai Jump Starter

Basic Parameters

Dimensions: 163×87×27mm

Capacity: 11100mAh(41.07Wh)

Output: 5V / 2.4A,12V jump starter port

Input: 5V / 2A

Charging time: ≤5.5hours

Jump start current: 250A

Peak current: 600A

Operating temperature: -20℃~55℃

Charging temperature: 0~55℃70mai Jump Starter

 

Specifications:

Brand 70Mai (from Xiaomi Youpin )
Model PS01
Color Black
Capacity 11,100mAh
Start Current 250A
P eak Current 600A
Type-C Input 5V/2A
Jump Start Output DC 12V
USB Output DC 5V/2.4A
Material PC+ABS
LED Flashlight Mode Lighting, Flash, SOS
Size 163*87*27mm
Clamp Type 8 protections smart clamps
Working Temperature -20℃~+55℃
Charging Temperature 0~55℃
Full Charging Time ≤5.5h
Certification CE / FCC / RoHs

Pacake Included:
1 x Lithium Jump Starter
1 x Smart Clamps
1 x USB Charging Cable
1 x Manual
1 x Portable Bag